500 m² Warehouse Epoxy Flooring in Oakleigh
Concrete To Style coated the floor of this 500m² commercial warehouse in Oakleigh, Victoria. The slab was completely ground and cracks were repaired and patched, then the floor was finished with two coats of commercial-grade epoxy.
Project facts: Oakleigh, Victoria; commercial warehouse; 500m²; two coats of commercial-grade epoxy; complete concrete grinding, crack and patch repairs.
Before and after: all three photographs are from this Oakleigh warehouse. The first shows the bare concrete floor before coating, with our floor-preparation equipment on site. The other two show the grey floor after coating.
Preparing a 500m² warehouse slab: the preparation covered the full 500m² slab. Concrete To Style carried out complete grinding, crack repairs and patch repairs before applying the epoxy.
Two coats of commercial-grade epoxy: after preparation, two coats of commercial-grade epoxy were applied. The after photographs show the grey finish across the warehouse floor.
Planning a warehouse floor? Every slab is different, so commercial floors are quoted after we look at the concrete. See how warehouse and factory work is scoped on our warehouse and factory flooring Melbourne page, compare systems on the commercial and industrial epoxy flooring page, or read more about the Epoxy Flooring service. For a natural concrete alternative, see our Port Melbourne warehouse Grind & Seal project. More completed work is on the project case studies page. Enquire through TradeHQ or call 0483 936 597.
Oakleigh warehouse: the bare concrete floor before coating, and two views of the finished commercial-grade epoxy floor.