EPO100T Plain Coat Melbourne | APC Solid Colour Epoxy Flooring

EPO100T Plain Coat is the APC solid-colour epoxy flooring system Concrete To Style installs across Melbourne and Victoria for clients who want a clean, seamless, single-tone floor rather than a decorative flake finish. It uses the same tinted EPO100T epoxy resin that sits underneath every APC broadcast system, applied here as the visible finish in its own right. As an APC Platinum installer, our Melbourne team plans each Plain Coat project around the slab, the way the space is used and the look the client is after - not around a one-size-fits-all template.

What a plain coat actually is

A plain coat is exactly what the name suggests: a pigmented epoxy coating rolled over prepared concrete to produce one continuous colour from wall to wall. There is no flake broadcast and no aggregate - just a smooth, seamless film in the colour you choose. Because the colour comes from the resin itself rather than a surface paint, the finish has real depth, and because the floor is seamless there are no grout lines or joints for dust and spills to sit in. The result reads as a considered, professional floor rather than painted concrete.

Where a plain coat suits

Across Melbourne and Victoria we install EPO100T Plain Coat in garages, workshops, salons, studios, retail spaces, showrooms, storage areas and back-of-house rooms - anywhere a tidy single-colour floor makes the space easier to use and easier to present. Homeowners often choose it for a garage or rumpus where they want a calm, uniform look that ties in with the joinery and walls. Commercial clients choose it where staff and customers see the floor every day and a clean, consistent colour supports the fit-out. It is also a practical answer for utility spaces that simply need a floor that sweeps and mops without fuss. For larger facilities, our commercial and industrial epoxy flooring page explains how we scope bigger Melbourne sites.

Colour choice

The EPO100T colour range runs to more than two hundred solid colours, from light neutrals and warm greiges through mid greys to deep charcoals and blacks, with bolder tones available for feature spaces. You can start comparing tones on our Colours page, but we always recommend confirming the final choice against physical samples at the on-site quote, because a colour reads differently under your lighting than it does on a screen. In Melbourne garages and commercial spaces, mid-to-dark greys are the most requested because they sit comfortably with brickwork, cabinetry and shop fittings while staying forgiving between cleans.

Concrete preparation comes first

A plain coat is honest - with no flake to distract the eye, the quality of the preparation underneath shows in the finished floor. Every project begins with a slab assessment: we check the concrete for moisture, movement cracks, drummy patches, old coatings and contamination, then talk through what we find before any work is booked. Preparation is mechanical. We diamond grind the slab back to clean, open concrete with dust extraction, repair obvious cracks, pin-holes and damaged edges, and grind repairs flush so they do not telegraph through the finish. We do not use acid etch shortcuts, because the bond between the epoxy and the concrete is what the whole floor depends on.

The installation sequence

Once the slab is sound, the build runs in clear stages. A tinted EPO100T epoxy prime coat is rolled on first to wet out the concrete and lock the system to the slab. Body coats in your chosen colour follow, with edges, corners and detail areas cut in by hand rather than skipped. Where the space calls for it, a clear protective topcoat such as Sparta 60 or Tetrathane UV can be added as the final layer. A standard Melbourne garage or commercial room generally runs across two to three days depending on slab condition and weather, and we keep you informed at each stage so you know exactly when the space is ready to walk on and when vehicles or fittings can return.

Finish and day-to-day upkeep

Living with a Plain Coat floor is deliberately simple. A soft broom, blower or dust mop deals with everyday grit, and a microfibre mop with warm water and a pH-neutral cleaner lifts marks and spills without scrubbing. The seamless surface means there is nowhere for oil drips, dust or food spills to hide, which is why salons, kitchens and workshops find it practical. As with any quality floor finish, harsh solvents and abrasive pads are best avoided - warm water and a mild cleaner are all it needs. We explain the care routine at handover so you know how to keep the floor looking the way it did on day one.

Plain coat or flake?

The most common question we hear is whether to choose a plain coat or a flake floor. They are different systems with a different look: a flake floor broadcasts decorative chips into the basecoat for a stone-like, textured finish, while a Plain Coat keeps a single smooth colour. If you are weighing up a garage, our double garage Epoxy Flake package from $2,199 incl GST is the flake option - it is a different system and a different finish to EPO100T Plain Coat, and the right choice depends on the look you want and how the space is used. For a closer look at blends, systems and cost factors on the decorative side, our Epoxy Flake flooring Melbourne guide covers the flake option in detail. We are happy to talk both through at the site assessment rather than push one over the other.

What to expect when you work with us

Concrete To Style keeps the process straightforward. When you enquire, we ask for a few photos and rough sizes first, then book an on-site assessment anywhere across Melbourne and Victoria. At the visit we inspect the slab, discuss colours and finishes, and explain the preparation and installation sequence in plain terms, so you know what is involved before any work begins. Commercial spaces are quoted on site because access, staging and trading hours change the scope; residential spaces are confirmed the same careful way. For related finishes, see our Epoxy Flooring service page, or browse completed local floors in the gallery.

Requesting a site assessment

The next step is a practical conversation about your Melbourne or Victorian property, the surface you have now and the finish you want to live and work with. Send your details through TradeHQ or call 0483 936 597 and we will arrange a time to look at the floor, bring colour samples, and give you a clear, site-specific recommendation.

Get a free quote or call 0483 936 597