Hyper Flake Melbourne: APC Hyper Flake Epoxy Flake Flooring

Hyper Flake is the APC Signature Series full-broadcast decorative flake system we install for Melbourne homeowners and selected commercial interiors that want a consistent polished-stone look without the cost of real terrazzo. The system starts with diamond-grind surface preparation back to sound concrete, because a flake floor is only as reliable as the bond underneath it. We then roll a tinted EPO100T epoxy prime and basecoat, broadcast Hyper Flake Signature Series chips to full coverage, scrape and vacuum the excess, and lock everything in with an entrapment coat followed by a Sparta 60 or Tetrathane UV-stable clear topcoat. That built-up film gives real thickness underfoot, a lightly textured seamless finish, and a surface that handles Melbourne garage traffic, shed gear and retail footfall.

Colour selection runs through the APC Hyper Flake palette on our Colours page, with blends such as Basalt, River Stone, Sandstone and Silver Stone photographed on real installed floors. We recommend looking at physical samples or a finished Melbourne floor before you lock a blend in, because phone photos of a chip bag rarely match how the same colour reads under LED strip lights or natural daylight. Once installed, the floor is straightforward to live with: a soft broom, dust mop or microfibre mop picks up grit, and occasional warm water with a pH-neutral cleaner keeps the clear coat looking fresh. Avoid harsh solvents or abrasive pads that can dull the finish over time.

A standard residential double garage in sound condition is typically completed in two to three days and is part of our garage Epoxy Flake packages from $2,199 incl GST, confirmed after we inspect the slab. Commercial and selected interior work is quoted on site, because access, downtime and slab condition all change the build. To see how Hyper Flake compares to the broader Epoxy Flake range, read our Epoxy Flake flooring Melbourne guide, or visit our Epoxy Flake service page for the full installation scope. You can request a free quote through TradeHQ, or call 0483 936 597 to arrange an on-site assessment.

Get a free quote or call 0483 936 597