Epoxy Flake Flooring Melbourne

Epoxy Flake Flooring Melbourne from Concrete To Style is a full-broadcast flake system for Melbourne/Victorian garages, sheds, workshops and homes. Diamond grind, two pigmented epoxy coats, flake to rejection, then two UV-stable polyaspartic clear coats selected to reduce yellowing and ambering. Hard-wearing, dirt-hiding and more grip than a smooth coat when wet — no floor is slip-proof. 15+ years, APC Advantage Platinum Member, Melbourne/Victoria only, based in Clyde VIC 3978.

Prep is the job: grind to sound concrete, repair cracks, coat only when ready. Double garage Epoxy Flake from $2,199 incl. GST on a sound standard slab up to approximately 36m², final scope confirmed after slab review; other slabs quoted after a site look. A standard double garage is typically completed over two days, with foot traffic after 24 hours and vehicles after 7 days following completion, unless the installer advises otherwise. 206+ colour/flake blends. Textured finishes and optional aggregates can be specified after assessing the area; outdoor and pool-surround suitability depends on substrate, drainage, exposure and the selected system.

For a packaged garage see double garage epoxy Melbourne. Prefer a sealed concrete look instead? Grind & Seal. Want the slab itself polished? Polished Concrete. More detail: the Epoxy Flake Flooring Melbourne guide, our epoxy flake garage guide, and why epoxy floors fail in Melbourne.

Melbourne/Victoria only. Call 0483 936 597 or get a free quote via TradeHQ.

About Epoxy Flake Flooring Melbourne

Epoxy Flake is our most requested residential system for Melbourne garages, alfrescos, laundries and pool surrounds. Every floor starts with diamond-grind preparation back to sound concrete, then two coats of pigmented epoxy with a full flake broadcast, scraped back and vacuumed before two UV-stable polyaspartic clear coats selected to reduce yellowing and ambering go down. The full broadcast gives a seamless, hard-wearing surface with a natural stone look that hides slab imperfections and cleans easily. We install genuine All Purpose Coatings flake systems, chosen with you based on the look you want, the way the space is used, the slab condition and the clear coat that suits it, and we review the slab in person before confirming the final price. A sound standard double garage up to approximately 36m² is from $2,199 incl. GST and is typically completed over two days, with foot traffic after 24 hours and vehicles after 7 days following completion, unless the installer advises otherwise. Other areas and larger floors are scheduled after the site assessment.

Step 1: Colour & Flake Selection

We walk you through 206+ base colours and flake blends, and confirm the finish that suits the space.

Step 2: Diamond Grind Preparation

The slab is diamond ground back to sound concrete, contaminants removed and any repairs made before coating.

Step 3: Two Epoxy Coats

Two coats of pigmented epoxy are rolled out to build a solid, even base across the whole floor.

Step 4: Full Flake Broadcast

Flake is broadcast to full rejection into the wet epoxy, then scraped back and vacuumed for a level surface.

Step 5: Two Polyaspartic Clear Coats

Two UV-stable polyaspartic clear coats seal the flake for a hard-wearing finish. A standard double garage is typically completed over two days, with foot traffic after 24 hours and vehicles after 7 days following completion, unless the installer advises otherwise.

Where this floor suits

Used in residential garages, showrooms, retail spaces, patios, alfresco areas, workshops and other spaces where a seamless, hard-wearing decorative floor suits. Wet areas, outdoor surrounds and commercial floors are assessed on site before we recommend a system.

What are epoxy flake floors made of?

Epoxy flake floors consist of a pigmented epoxy base coat with coloured vinyl flake broadcast into the surface, sealed with clear polyaspartic topcoats. Flake blends come in hundreds of colour combinations.

Can epoxy flake be used outdoors or around pools?

Sometimes. Outdoor and pool-surround suitability depends on the substrate, drainage, sun and water exposure and the system selected, so we assess the area before recommending a build. We will tell you if a different system suits the space better.

How do I choose the right colour combination?

We provide colour charts and can show you previous projects for inspiration. Our team helps you select colours that suit the space, and we can provide sample boards before installation.

How much grip does a flake floor have?

The flake texture gives more grip than a smooth coat, and textured finishes or optional aggregates can be specified after assessing the area. No floor is slip-proof, and any floor can be slippery when wet.

Can you match existing colours or create custom blends?

With 206+ colours available, we can put together blends that work with your existing décor or design preferences.

Get a free quote or call 0483 936 597