Commercial Kitchen Epoxy Flooring Melbourne
A commercial kitchen floor in Melbourne has a hard life. Hot oil, food acids, scrubbing, wet traffic and the dinner rush all hit the same slab. Bare concrete dusts and stains. Loose vinyl lifts at the joins. Thin paint peels under a mop. Commercial kitchen epoxy flooring is how we turn that slab into a seamless, washable surface that can take the shift. Concrete To Style is Melbourne-based. We coat cafes, restaurants, bakeries and food-prep rooms across the metro area. This is not a leftover garage kit.
What a kitchen floor actually needs
Around cooklines and wash-down areas you need a seamless, non-porous finish that does not trap grease in joins, texture you can stand on when the floor is wet, chemical resistance to degreasers, citrus cleaners and food spills, edges, drains and plinths that are actually prepped rather than painted around, and a system you can hose and scrub without lifting the film. We do not invent a HACCP stamp or a made-up slip rating on a blog. Grip and the right system are specified on the quote for that kitchen.
Epoxy vs Grind and Seal in a kitchen
Epoxy Flooring (/services/epoxy-flooring) - plain coat or a textured industrial system - is the usual call when you want a solid colour, a thicker film, and a surface that reads as one finished floor under foot traffic and carts. See Commercial and Industrial Epoxy Flooring (/commercial-industrial-epoxy-flooring) for kitchens, factories, warehouses and back-of-house areas. Grind and Seal (/services/grind-and-seal) suits some back-of-house areas where you want to keep the concrete look, lock down the dust, and add a clear or lightly pigmented sealer with texture. It is thinner than a full epoxy build, so it is not always the right answer next to a deep fryer. Epoxy Flake (/services/epoxy-flake) can work in staff rooms and some prep zones when you want dirt-hiding texture; around a heavy cookline we usually lean to a solid industrial system instead. Metallic epoxy is not offered. Do not specify it for a kitchen.
Prep is the job
Coatings fail when prep is skipped. We diamond-grind to open the slab, repair cracks and broken edges, check moisture, and detail drains and wall junctions so water does not get under the film. Shortcut prep is what you see peeling beside the dishwasher six months later. It is the same failure pattern covered in our guide on why epoxy floors fail (/why-epoxy-floors-fail-melbourne).
Melbourne kitchens, not a one-size kit
Inner-city cafes, suburban restaurants and larger food-prep rooms all see different traffic and cleaning chemicals. West-facing doors cook a slab in summer; shaded basements stay damp. Both need the right texture and a system chosen on site, not from a brochure. For wet zones, see Anti-Slip Epoxy Flooring Melbourne (/anti-slip-epoxy-flooring-melbourne). For kitchens specifically, see Kitchen Epoxy Flooring Melbourne (/kitchen-epoxy-flooring-melbourne). We are based in Clyde, VIC 3978 and work across Greater Melbourne and surrounding Victorian areas.
What a quote needs from you
Photos of the floor, roughly how many square metres, whether there is existing vinyl, paint or epoxy, and whether the kitchen can shut overnight or needs after-hours work. We quote through TradeHQ.
Concrete To Style has 15+ years of concrete floors experience, and is an APC Advantage Platinum Member. Call 0483 936 597 or get a quote at TradeHQ quote form.
Get a Free Quote or call 0483 936 597