Epoxy Over Tiles Melbourne — Coat Sound Tiles, Lift the Rest
Epoxy over tiles Melbourne is a site-by-site decision at Concrete To Style, not a yes for every laundry or kitchen. Some ceramic and porcelain floors in Greater Melbourne homes can take a bonded Epoxy Flooring coat after we grind the glaze and key the grout lines; loose, hollow, or water-damaged tiles have to come up first. We only coat when the substrate is sound. This is not a shortcut around a failed wet-area membrane.
Prep decides it. We test for hollow tiles, grind to a profile the resin can hold, vacuum, then install a pigmented Epoxy Flooring plain coat or, in a garage, an Epoxy Flake system. If the room is a typical residential garage on concrete rather than tiles, use the Double Garage Epoxy Flake package from $2,199 incl. GST. Commercial kitchens and factory slabs are quoted on Commercial and industrial Epoxy Flooring.
We are based in Clyde, VIC 3978 and work Greater Melbourne and surrounding Victorian areas only. Send photos of the tiled floor, any cracks, and the room use through TradeHQ or call 0483 936 597 before we quote.
Epoxy over tiles in Melbourne can refresh a sound tiled floor without the mess of removing every tile. Concrete To Style works across Melbourne, Greater Melbourne and Victoria on homes, garages and selected commercial spaces. We assess the existing surface first, then recommend the right system for the room and its moisture conditions. Tile overlay is suitable when tiles are firmly bonded, the substrate is stable, grout is sound and the surface is dry.
Where the floor passes that check we tap-test the whole area, mark any drummy sections, replace or remove what has failed, then diamond grind the glazed surface so the resin has a mechanical key rather than sitting on a slick face. Bond failure on tiles almost always traces back to skipped preparation, so we treat concrete and tile surface preparation as the main part of the job rather than an add-on.
Once the floor is prepped we choose the finish to suit the room. A pigmented Epoxy Flooring plain coat suits laundries, hallways and utility spaces, while a full Epoxy Flake build hides grout lines better and wears well in garages and workshops. For wet zones, entries and outdoor-adjacent areas we can add an anti-slip epoxy flooring finish so the surface stays comfortable underfoot when damp. Colour and flake blends are shown on our colours page so you can match the floor to existing cabinetry, tile skirtings and paintwork.
Related Melbourne flooring pages and services: Epoxy Flake Flooring Melbourne, garage epoxy flooring Melbourne, Epoxy Flooring services, anti-slip epoxy flooring Melbourne, concrete surface preparation, floor colours and flake blends, Melbourne service areas, why epoxy floors fail in Melbourne, and our blog. Book an on-site assessment through TradeHQ or call 0483 936 597.
Get a free quote or call 0483 936 597