Litho Flake Melbourne | APC Litho Flake Epoxy Flake Flooring

Litho Flake is the APC Epoxy Flake system Concrete To Style recommends for Melbourne homeowners who want their garage or residential slab to look like natural stone rather than painted concrete. It is still very much an Epoxy Flake floor at heart - a full broadcast of decorative flakes set into a tinted epoxy basecoat - but the Litho Flake chip blend is shaped and coloured to read like granite and basalt flecks rather than confetti. Across Melbourne and Victoria we install it in garages, entryways, rumpus rooms and covered alfresco areas where the family wants a finished floor that feels like part of the home, not an afterthought.

Why it suits Melbourne garages and residential slabs

Most Melbourne garages sit on a plain grey slab that dusts, stains and shows every tyre mark. An APC Litho Flake system turns that slab into a seamless, lightly textured surface with real film build, so the floor stops generating concrete dust and starts behaving like a proper room. Because the flakes are broadcast to full coverage, the finish hides the minor imperfections every older Melbourne slab carries - hairline cracks, trowel marks, patched sections - without pretending they were never there. It also copes well with the way Victorian garages are actually used: cars coming in wet from a winter commute, bikes, mowers, gym gear and the occasional dropped tool.

The natural look of the flakes

The visual character of Litho Flake is what sets it apart from a standard garage coating. The chips mimic the mineral flecks you see in cut stone, so under natural daylight or garage LEDs the floor has depth and movement instead of a flat plastic shine. The range pairs 205+ EPO100T base colours with blends such as Cobalt, Ferro, Zinc, Nickle and Alloy, and you can compare them on our Colours page. We always bring physical samples to the on-site quote, because a blend that looks warm on a screen can read completely differently next to your brickwork, garage door colour and lighting. If you prefer a larger Signature Series stone-look chip, our Hyper Flake Melbourne page explains that option.

How we prepare and install it

Every Litho Flake floor starts with prepared concrete, and this stage decides how the floor performs for years afterward. We begin with a crack and joint assessment, checking the slab for movement cracks, drummy patches, moisture and old coatings. The surface is then mechanically ground with diamond tooling and dust extraction - never acid-etched as a shortcut - so the resin bonds to clean, open concrete rather than a sealed or contaminated surface. Damaged edges, spalls and static cracks are repaired and ground flush before any resin is mixed.

Once the slab is sound, we roll a tinted EPO100T epoxy primer and basecoat matched to your chosen blend, then broadcast the Litho Flake chips to full coverage while the base is wet. After curing, the loose flake is scraped back and vacuumed to an even texture, and the floor is locked in under a protective clear finish such as Sparta 60 or Tetrathane UV. That clear top layer is what gives the floor its easy-clean, non-yellowing character. A standard Melbourne garage generally runs two to three days from grinding to final coat, and we keep you informed at each stage so you know exactly when the space is back in use.

Cleaning and everyday use

Living with a Litho Flake floor is deliberately simple. A soft broom or blower deals with the grit that comes in on tyres, and a microfibre mop with warm water and a pH-neutral cleaner lifts oil drips and muddy footprints without scrubbing. There are no grout lines or pores for oil to hide in, and the lightly textured surface gives sensible grip underfoot when the floor is wet. Avoid harsh solvents and abrasive pads, which can dull the clear coat over time - warm water and a mild cleaner are all it needs.

What it costs and how to enquire

A sound standard double garage is part of our garage Epoxy Flake packages from $2,199 incl GST, with the final scope confirmed after we inspect the slab - moisture, cracks and old coatings can all change the preparation required. Larger garages, entryways and combined spaces are quoted on site. For background on systems and cost factors, read our Epoxy Flake flooring Melbourne guide, or see the full installation scope on our Epoxy Flake service page. If you prefer a bolder decorative chip for a feature garage, our Ultra Flake Melbourne page covers the range we install most often.

As an APC Platinum installer, Concrete To Style helps Melbourne homeowners choose and install an Epoxy Flake floor that suits the home. When you enquire through TradeHQ or call 0483 936 597, we ask for a few photos and rough sizes first, then book an on-site assessment anywhere across Melbourne and Victoria before any price is locked in.

Get a free quote or call 0483 936 597